Active Unanswered
Search found 7 matches
- Wed Nov 18, 2015 11:50 am
- Forum: Engines & Powertrain
- Topic: locate a new temperature sensor for KBL
- Replies: 3
- Views: 3471
Re: locate a new temperature sensor for KBL
Thank you Jim. I'll check that out.
- Tue Nov 03, 2015 7:38 pm
- Forum: Engines & Powertrain
- Topic: locate a new temperature sensor for KBL
- Replies: 3
- Views: 3471
locate a new temperature sensor for KBL
I need a new temperature sensor for my 1956 Capri KBL engine. Mine is electric. I need the part that screws in to the engine head. Where can I find one?
- Wed Sep 02, 2015 4:45 pm
- Forum: How to Use Boat Buzz
- Topic: KBL carbs won't idle
- Replies: 9
- Views: 5599
Re: KBL carbs won't idle
Thanks. Good idea. The idle passageways in the carbs are extremely small and I have cleaned them to death. Getting closer. Not sure that I don't have a vacuum leak somewhere. Exploring manifold gaskets now. Also discovered that accelerator pumps will stick as well as the main needle over the floats....
- Sun Jun 28, 2015 4:45 pm
- Forum: How to Use Boat Buzz
- Topic: KBL carbs won't idle
- Replies: 9
- Views: 5599
Re: KBL carbs won't idle
thanks for the thoughts James. Checked out the floats and all appear to be working properly. I haven't been able to keep her running at less than 1500 rpm so I haven't tried to synchronize the carbs yet.
- Sun Jun 28, 2015 4:17 pm
- Forum: How to Use Boat Buzz
- Topic: KBL carbs won't idle
- Replies: 9
- Views: 5599
Re: KBL carbs won't idle
Haven't been able to idle her down low enough to try to synchronize them yet. Have them all set at the same on the idle jet, 1 1/2 turns out and have tried 2 1/2 and 5 on the main jets without any luck.
- Sun Jun 28, 2015 1:06 pm
- Forum: How to Use Boat Buzz
- Topic: KBL carbs won't idle
- Replies: 9
- Views: 5599
KBL carbs won't idle
I have a '56 Capri with the KBL engine and 3 carbs. She will run at fast rpms but will not stay running when I try to get her to idle. Have rebuilt the fuel pump and cleaned the carbs. She acts like she is not getting enough fuel when I cut her back. Any ideas? Thanks, JohnB
- Thu Jan 26, 2012 5:08 pm
- Forum: On the Hard
- Topic: Covers
- Replies: 1
- Views: 2634
Covers
Does anyone know where one may order a new cover for a 1956 Chris Craft Capri, 19 ft? My original is about shot.