Active Unanswered
Search found 14 matches
- Mon Oct 05, 2009 1:49 pm
- Forum: Fiberglass - Cockpit and Cabin Interiors
- Topic: Steering cable
- Replies: 0
- Views: 6248
Steering cable
Ok guys I have exhausted my seach for a new steering cable for my 1970 Chris Craft XK 19. This is a rack and pinon system that has a round cylinder about 1 1/2 inches in diameter and about 16 inches long that has a round cylinder inside oh it with teeth on one side of it that the cable is attached t...
- Wed May 20, 2009 9:47 am
- Forum: Fiberglass - Hull Construction
- Topic: If I gutt it can I roll it over by hand XK-19
- Replies: 7
- Views: 12355
roll over xk19
I am in Atlanta GA. you can give me a call any time before 8pm west coast time.
Thanks,
Tim
Thanks,
Tim
- Tue May 19, 2009 4:33 pm
- Forum: Fiberglass - Hull Construction
- Topic: XK-19 Should I pop the top?
- Replies: 3
- Views: 9261
don't pop the top
listen please call me and I will give you the poop on how to restore your boat. I did a lot of glass work on mine to make it stronger in places where it is weak. I completly gutted the boat. You can take out all the flooring without taking the top off the boat. I actually glassed the inside of my bo...
- Tue May 19, 2009 4:23 pm
- Forum: Fiberglass - Hull Construction
- Topic: If I gutt it can I roll it over by hand XK-19
- Replies: 7
- Views: 12355
painting a xk19 and rolling it over
I just had my 1970 xk19 regelcoated. Yes I said regelcoated. My shop turned it over and put it on a dolly. They went thru the exhaust holes with a heavy rope on the back and tied it to a big overhead hoist and took the bracket from the front lifting eye and mounted it on the outside where the eye wa...
- Sun Jul 20, 2008 6:41 pm
- Forum: Fiberglass - Electrical Systems
- Topic: Air Guide Speedometer
- Replies: 0
- Views: 7446
Air Guide Speedometer
If anyone knows where I can get a surface mounted Air Guide Speedometer I would really appreciate it. I have looked everwhere.
Tim Burruss
404 556 5906 cell
Tim Burruss
404 556 5906 cell
- Thu Jan 17, 2008 4:39 pm
- Forum: Fiberglass - Odds & Ends
- Topic: xk 19 restoration
- Replies: 7
- Views: 10832
gelcoating the xk19
I am gelcoating my xk19 as you read this message. If you would like to talk about the positive's and neg's please call me
Tim Burruss
404 556 5906
Tim Burruss
404 556 5906
- Mon Dec 03, 2007 1:21 pm
- Forum: Fiberglass - Research Related
- Topic: XK 19 paint details
- Replies: 0
- Views: 4757
XK 19 paint details
I need some detailed pictures for the waterline strip of the 69 or 70 xk19. Specifically the strip where it transitions from the side of the boat to under the bow. I am re-gelcoating my boat and we did not get pictures of the original strip. The strip does a little zig-zag when it transitions over t...
- Sat Nov 17, 2007 5:10 pm
- Forum: Research Related
- Topic: Gelcoating the strip on a XK19 need help
- Replies: 0
- Views: 2094
Gelcoating the strip on a XK19 need help
I am in need of a few pictures of the waterline paint strip for an early XK19. I need the one that goes thru the chines not the one that follows the chine up to the bow. If you have a xk19 that has not been painted please contact me. My paint man sanded the strip before we got the exact pattern and ...
- Wed Nov 07, 2007 3:12 pm
- Forum: Fiberglass - Research Related
- Topic: Green XK19 or Super Sport?
- Replies: 29
- Views: 34784
They also positioned your air scoops out to the side of the boat instead of on top infront and on the deck in the rear. I can see your old waterline thru the old bottom paint. I was just by the shop where i am having mine gelcoated and he just got the stripe on. He said it was a bear but it looks gr...
- Tue Nov 06, 2007 11:19 pm
- Forum: Fiberglass - Research Related
- Topic: Green XK19 or Super Sport?
- Replies: 29
- Views: 34784
- Thu Nov 01, 2007 10:54 am
- Forum: Fiberglass - Hull Construction
- Topic: Re Gelcoating
- Replies: 6
- Views: 11638
gelcoating
Hi guys I am sorry for not getting back sooner. I totally agree with what was said from all of you. I I was thinking of painting but after I saw some of the gelcoat work my shop turned out there was no question I wanted gelcoat.. Just for what it is worth the paint I was going to use was made by Ste...
- Mon Oct 22, 2007 11:51 am
- Forum: Fiberglass - Engines & Powertrain
- Topic: Restoring a 1970 XK19 V-drive
- Replies: 0
- Views: 3468
Restoring a 1970 XK19 V-drive
I am restoring a 1970 XK 19 V-drive. If anybody is restoring, working on or owns a XK 19 I would welcome any dialog either by email or by phone. I have engine, transmission, chrome and interior done. I am now having the boat rejelcoated. I am about 3/4's the way through my boat and now trying to fin...
- Mon Oct 22, 2007 11:41 am
- Forum: Fiberglass - Hull Construction
- Topic: Re Gelcoating
- Replies: 6
- Views: 11638
XK 19
Hi Peter I am restoring a 1970 XK 19 myself. I would like to talk to you about your project. Maybe we can compare notes. I am in the process of getting the hull rejelcoated now. I hope to have it ready for next summer. My cell is 404 556 5906. Look foward to hearing from you.
Tim Burruss
Tim Burruss
- Mon Oct 22, 2007 11:32 am
- Forum: Fiberglass - Cockpit and Cabin Interiors
- Topic: Steering wheels
- Replies: 7
- Views: 18405
Steering wheels
I am trying to find an original steering wheel for a 1970 Chris Craft XK 19. It has 3 chrome spokes and has a white grip ring. I think is may be a Grant but I can't find it on there website
thanks,
Tim Burruss
thanks,
Tim Burruss