Active Active   Unanswered Unanswered

Search found 400 matches

by Greg Wallace
Fri Jul 08, 2016 7:24 am
Forum: Hardware & Rigging
Topic: Throttle rod bushing for 1950 CC Racing Runabout
Replies: 4
Views: 3233

Re: Throttle rod bushing for 1950 CC Racing Runabout

Not absolutely positive but I believe as long as an "automotive" style steering gear assy was installed the horn operated through the wheel. Dash mounted buttons "I suspect" correlated with move to marine type or "non-auto" based steering set ups. DISCLAIMER: This is from memory and not hard documen...
by Greg Wallace
Wed Jul 06, 2016 8:28 am
Forum: Engines & Powertrain
Topic: CC M Engine - 3 marks on oil test rod
Replies: 11
Views: 4969

Re: CC M Engine - 3 marks on oil test rod

There were at least two different dip sticks used on M engines. One was for all engines prior to Serial #75841 except twin Screw Std rotation. The other for those after Serial #75840 and twin Screw Std rotation. Oil test markings are as follows: For deep pan engines (before 1956): 5 - 15 degree runn...
by Greg Wallace
Tue Jul 05, 2016 8:22 am
Forum: Engines & Powertrain
Topic: CC M Engine - 3 marks on oil test rod
Replies: 11
Views: 4969

Re: CC M Engine - 3 marks on oil test rod

According to my dealer service bulletin #18579532142 dated July 12, 1940, the sticks having three marks are to be read thusly:


Top Mark: OK

Center Mark: OH NO!

Third mark: OH SH#@ !
by Greg Wallace
Fri Jun 24, 2016 9:08 am
Forum: Electrical Systems
Topic: Petronix Coil Failure?
Replies: 7
Views: 3464

Re: Petronix Coil Failure?

Have you confirmed ignition failure? Symptoms as described are also classic vapor lock. Winter blend fuels that are left over and being dumped by suppliers along with ethanol, can create an issue where not previously experienced.
by Greg Wallace
Mon Jun 20, 2016 8:02 am
Forum: Odds & Ends
Topic: Proper Boat Lift
Replies: 5
Views: 4597

Re: Proper Boat Lift

In my opinion the ultimate is the platform type with bunks just like a good trailer. Suspended at four points (or more depending upon length). The "ACE" type "Pipe" hoist works great. Additional advantages to platform include improved access to boat when lifted and great for winter storage in boat h...
by Greg Wallace
Fri Jun 17, 2016 12:49 pm
Forum: Odds & Ends
Topic: Fasteners?
Replies: 8
Views: 4069

Re: Fasteners?

When the mariners museum opens up you might try ordering the "Materials Specification" List for your model boat. If available it will tell you exactly how many and what size was used and just about everything else that went into the construction including the length, color and size of the wire.
by Greg Wallace
Thu Jun 16, 2016 7:36 am
Forum: Finishing
Topic: 1932 Chris Craft Bilge and bottom paint
Replies: 10
Views: 5167

Re: 1932 Chris Craft Bilge and bottom paint

I do not know if the use of gray bilge paint in 1932 was universal (for CC) but I am pretty sure it was used on some. I would have to dig to confirm but I have some factory photos of some 1932 models clearly showing gray. I'm sure someone will confirm or refute, but a little more research might prov...
by Greg Wallace
Thu Jun 09, 2016 10:58 am
Forum: Odds & Ends
Topic: What does V/T mean on the Hull Card?
Replies: 10
Views: 4942

Re: What does V/T mean on the Hull Card?

Great info guys. This old dog learns a new trick every day!
by Greg Wallace
Thu Jun 09, 2016 8:08 am
Forum: Odds & Ends
Topic: What does V/T mean on the Hull Card?
Replies: 10
Views: 4942

Re: What does V/T mean on the Hull Card?

I believe you are looking at U/T intended to mean "utility". It appears that the writer did not like his initial "k" and wrote it again. Keep in mind that there was no way to erase mistakes so cross outs and doubles are not unheard of. The hull cards retained by the factory and from which your copy ...
by Greg Wallace
Thu Jun 09, 2016 7:36 am
Forum: Odds & Ends
Topic: What does V/T mean on the Hull Card?
Replies: 10
Views: 4942

Re: What does V/T mean on the Hull Card?

Could it possibly be UT rather than VT?
by Greg Wallace
Mon Jun 06, 2016 8:23 am
Forum: Electrical Systems
Topic: grounding amp meter
Replies: 5
Views: 2796

Re: grounding amp meter

We almost lost the only 23 barrel with twins to this very same problem when the ammeter shorted. We believe in fuse or breaker in this circuit. Also a battery switch for emergency shut off... and for when nobody's home.
by Greg Wallace
Tue May 24, 2016 8:04 am
Forum: Hull Construction
Topic: Fiberglass Covered Hull Leak
Replies: 30
Views: 11278

Re: Fiberglass Covered Hull Leak

Lyndon, I am not good enough to provide a definitive diagnosis on the benefit of one photo. If pressed I would tend to suspect there are likely major underlying issues supporting the majority of the comments. I have personally, however, been surprised to find very sound structure under a few delamin...
by Greg Wallace
Wed May 11, 2016 6:11 am
Forum: Odds & Ends
Topic: Looking for advice on a boat lift for my 1929 Cadet
Replies: 4
Views: 3472

Re: Looking for advice on a boat lift for my 1929 Cadet

A platform that can be lifted at four points with bunks attached running fore and aft supporting the hull beneath the main (engine) stringers. Additional supports at the chine would also be ideal. The goal is to replicate the support provided by a well designed trailer. Side guides to help center wh...
by Greg Wallace
Mon May 09, 2016 6:56 am
Forum: On the Hard
Topic: Another boat, another trailer
Replies: 2
Views: 3259

Re: Another boat, another trailer

You've got yourself a very cool and very rare boat. Congrats!
by Greg Wallace
Thu May 05, 2016 7:38 am
Forum: Engines & Powertrain
Topic: A "PICKLED" ENGINE
Replies: 19
Views: 7459

Re: A "PICKLED" ENGINE

Ohio selects option #1, preserved for long term storage. Used locally since before my time and that's quite awhile ago. Our reasoning was that pickled by definition means preserved. I can, however, understand the opposite derivation in salt water areas since brine is associated with pickling.
by Greg Wallace
Thu May 05, 2016 7:21 am
Forum: Odds & Ends
Topic: 1955 22' Continental Information wanted
Replies: 7
Views: 5231

Re: 1955 22' Continental Information wanted

Among the most handsome utility designs of the era and my favorite. Thank you Don Mortrude.
by Greg Wallace
Mon Apr 25, 2016 8:12 am
Forum: Engines & Powertrain
Topic: Moving Forward while in neutral
Replies: 11
Views: 5119

Re: Moving Forward while in neutral

The extra noise in reverse is the planetary gears put into motion as a result of the reverse brake band stopping the drum. Extra parts moving around more sound. Normal.
by Greg Wallace
Sat Apr 16, 2016 10:46 am
Forum: Finishing
Topic: Registration numbers under varnish need changing
Replies: 29
Views: 10096

Re: Registration numbers under varnish need changing

if painted on they were likely painted over some initial varnish coats. You may be able to very carefully sand then off with out breaking through to underlying stain. Then build up some varnish and replace registration numbers then more varnish to blend with rest of finish. It can be tricky but I ha...
by Greg Wallace
Fri Apr 08, 2016 9:46 am
Forum: Finishing
Topic: When to Bleach?
Replies: 15
Views: 7861

Re: When to Bleach?

Please let us know how you make out. I'm pretty sure this has been done and the formula exists. If you have to start over I have an original can of this stuff laying around somewhere.
by Greg Wallace
Thu Apr 07, 2016 8:25 am
Forum: Finishing
Topic: When to Bleach?
Replies: 15
Views: 7861

Re: When to Bleach?

Have you contacted Frank Miklos? last I heard he was getting color duplicated from original CC.
by Greg Wallace
Tue Apr 05, 2016 7:34 am
Forum: Finishing
Topic: My 1958 Cavalier Refinish Project
Replies: 8
Views: 4073

Re: My 1958 Cavalier Refinish Project

Painted hull with varnished decks can be quite attractive.
by Greg Wallace
Tue Apr 05, 2016 7:30 am
Forum: Engines & Powertrain
Topic: Water Cooling - 1963 Chris Craft
Replies: 10
Views: 4235

Re: Water Cooling - 1963 Chris Craft

That would be true if the hard freeze event occurred prior to winterize where the entire engine was vulnerable. If the manifold in question was inadvertently neglected or did not drain properly then that individual component could have been isolated. I've seen this more times than I can count. The m...
by Greg Wallace
Mon Apr 04, 2016 12:42 pm
Forum: Engines & Powertrain
Topic: Water Cooling - 1963 Chris Craft
Replies: 10
Views: 4235

Re: Water Cooling - 1963 Chris Craft

If cost and availability are of no concern then by all means replace. If the boat has a salt water history I would likely plan for replacement. HOWEVER, IF cost or availability are a factor AND you can determine that the crack was a freeze related fracture AND there is no internal leakage and/or exc...
by Greg Wallace
Mon Apr 04, 2016 8:39 am
Forum: Engines & Powertrain
Topic: Water Cooling - 1963 Chris Craft
Replies: 10
Views: 4235

Re: Water Cooling - 1963 Chris Craft

Manifolds may indeed be "rotten" but may have been cracked from freezing if a northern boat. Common fix back in the day was "marine tex" and was often very effective in lieu of a replacement manifold. If the jacket is only compromised externally then a redo of similar material may fix your leak. Mak...
by Greg Wallace
Fri Apr 01, 2016 7:34 am
Forum: Research Related
Topic: My 18' Sportsman hull ID was mis-numbered
Replies: 6
Views: 5026

Re: My 18' Sportsman hull ID was mis-numbered

The hull number stamper guy was reassigned to engine assembly. Shortly thereafter "counter" rotation was discovered.
by Greg Wallace
Mon Mar 14, 2016 10:04 am
Forum: Research Related
Topic: Cracked Ice Gauge Panel Treatment
Replies: 12
Views: 6783

Re: Cracked Ice Gauge Panel Treatment

Steve,
Have photo of great original 6 unit panel in 1939 19. Saw and touched it myself and is real. Don't know how to post pics yet...(you can all stop laughing anytime now)so will email. You may post if you wish.
by Greg Wallace
Mon Mar 14, 2016 8:18 am
Forum: Finishing
Topic: Boot Stripe Colors
Replies: 9
Views: 8519

Re: Boot Stripe Colors

Lower color is red. The red/white scheme was popular with a number of models of the period. I have a vague memory of the colors being switched from top to bottom on some (year) models but without research don't take my word for it. I have never seen an original blonde holiday without two tone stripe...
by Greg Wallace
Thu Mar 10, 2016 12:41 pm
Forum: Cockpit and Cabin Interiors
Topic: Barrelback dashboard stain
Replies: 28
Views: 12090

Re: Barrelback dashboard stain

Don, I agree completely. Debate makes it fun and draws out the info we crave. This is supposed to be fun. This is a boat club not a fight club. I will re-read the paint article but don't recall being "satisfied" beyond hoping the pre-war color was correct because I really like the darker blue. I hav...
by Greg Wallace
Thu Mar 10, 2016 10:47 am
Forum: Cockpit and Cabin Interiors
Topic: Barrelback dashboard stain
Replies: 28
Views: 12090

Re: Barrelback dashboard stain

Greg, this is very well discussed in a brass bell article that don and maybe brian? wrote about 5 years ago. there are 3 colors, the darkest blue is pre-war, the somewhat lighter is post war, and the small block chevy is the lightest blue. They are also discussed here in the boat buzz, and there wa...
by Greg Wallace
Thu Mar 10, 2016 8:21 am
Forum: Cockpit and Cabin Interiors
Topic: Barrelback dashboard stain
Replies: 28
Views: 12090

Re: Barrelback dashboard stain

While we're waiting for Mr. A's response would anyone (with large ones) like to introduce a discussion on engine paint and stain color (pre-war vs post-war)???