Active Unanswered
Ivalite Adjustment or fix
Moderators: Don Ayers, Al Benton, Don Vogt
Ivalite Adjustment or fix
In the classic Ivalite, Any suggestions on how to tighten the lamp to support as shown in the photo. It moves with the knob but is too loose to stand straight up. Thanks.
Re: Ivalite Adjustment or fix
You need to screw the neck back in.
Jim Staib
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
Re: Ivalite Adjustment or fix
Thanks, I will double check but I didn’t see any threads at that interface, that’s where it swivels and rotates.
Re: Ivalite Adjustment or fix
Should sit like this
Jim Staib
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
Re: Ivalite Adjustment or fix
If you look close there are threads in there
Jim Staib
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
Re: Ivalite Adjustment or fix
Jim,
Really helpful and really fine threads. Ill use my stronger glasses this time. I will let you know how it turns out. Appreciate the photos and detail. Many thanks.
Tom
Really helpful and really fine threads. Ill use my stronger glasses this time. I will let you know how it turns out. Appreciate the photos and detail. Many thanks.
Tom
Re: Ivalite Adjustment or fix
It turned out that the threads were intact but worn down so they no longer engaged with the base threads. I purchased a used Ivalite on eBay and took it apart and used the neck to replace the threaded neck. It threaded in nicely and it was interesting to see that you can disassemble the neck and base interface effectively. Success. See pics.
Who is online
Users browsing this forum: No registered users and 5 guests