Active Unanswered
Fender cleat location
Moderators: Don Ayers, Al Benton, Don Vogt
-
- Posts: 178
- Joined: Mon Apr 10, 2006 7:44 am
- Location: Gainesville, Florida
- Contact:
Fender cleat location
Some time ago there was a discussion about how many fender cleats came on the Chris Crafts. My 1955 17' Sportsman's build sheet says mine had 6. When I got the boat, there were only 4 and the boat had undergone a restoration (an incorrect one) a number of years ago. [b]So where, if you had 4, or 6, would they be positioned?[/b] I dug through a bunch of old Yachting, Rudder, Motorboating ads and surprisingly, Chris Craft didn't advertise pictures of their boats with hardware on them other than step pads and lifting eyes.
Re: Fender cleat location
Get some fenders and test them. Put the cleats where they will work.
Jim Staib
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
-
- Posts: 178
- Joined: Mon Apr 10, 2006 7:44 am
- Location: Gainesville, Florida
- Contact:
Re: Fender cleat location
Jim, That's what I did...but I was curious if there was any "designated" location...See you at Tavares!
George
George
- maritimeclassics
- Posts: 700
- Joined: Sat Mar 03, 2007 4:35 pm
- Location: Traverse City, Mi
- Contact:
Re: Fender cleat location
Most of the boats that I have done has 6. One seems to be always in front of the windshield about a foot forward of the windshield bracket, you should be able to reach it from the drivers seat. The other is midship and the last one is a bit tricky. You should not have it so far back so the bumper can roll off the back side and get stuck behind the transom. It also should not be anywhere were someone getting into the boat (at the back seat) can trip on it getting in. This is easy on a runabout but the placement is more difficult on a utility. This is a picture of a 17' 1957 and it looks like they are all in a good place to me, this is what I would do.
Family member of Chris Craft founder
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
- maritimeclassics
- Posts: 700
- Joined: Sat Mar 03, 2007 4:35 pm
- Location: Traverse City, Mi
- Contact:
Re: Fender cleat location
I believe yours has a toe rail up front so the forward on would go aft a bit closer to the windshield bracket maybe about 4-5 inches and just inside the toe rail about an inch.
Family member of Chris Craft founder
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
- maritimeclassics
- Posts: 700
- Joined: Sat Mar 03, 2007 4:35 pm
- Location: Traverse City, Mi
- Contact:
Re: Fender cleat location
Or you could put it about an inch behind the toe rail. This way the line would not go over the toe rail and mare up the varnish.
Family member of Chris Craft founder
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
-
- Posts: 178
- Joined: Mon Apr 10, 2006 7:44 am
- Location: Gainesville, Florida
- Contact:
Re: Fender cleat location
Thanks! Funny how the little things can bug you.
Who is online
Users browsing this forum: No registered users and 3 guests