I have a 1962 Aluminum CC Roamer Silver Comet that has some corrosion on the hull. I have 2 questions.
1) What kind, or Brand of primer should I apply to the bare aluminum inside the hull to prevent corrosion, and on the outside prior to painting?
2) is there a 'Bondo' type of filler that I can apply to the outside of the hull to fill in small spots of corrosion, and dents prior to painting to get a smooth finish?
Active Unanswered
Aluminum Hull Corrosion Repair?
Moderators: Don Ayers, Al Benton
-
- Posts: 6
- Joined: Sat Aug 10, 2013 10:02 pm
- Contact:
Re: Aluminum Hull Corrosion Repair?
Deja vu ....all over again.
Google "Aluminum white rust"
Google "Aluminum white rust"
-
- Posts: 6
- Joined: Sat Aug 10, 2013 10:02 pm
- Contact:
Re: Aluminum Hull Corrosion Repair?
Thanks again Doug,
But I have already done that and still did not find any valuable information. I was hoping some one with some experience would respond with there solution.
But I have already done that and still did not find any valuable information. I was hoping some one with some experience would respond with there solution.
Re: Aluminum Hull Corrosion Repair?
Couple of sources,
Metal Boat Society has some good articles. and
Roamer Owners http://www.yachtforums.com/forums/chris ... ssion-232/
I have a steel 25' so do not know much about aluminum
Adding:
Metal Boat Society has a TOPIC forum (have to register) there is a corrosion topic.
Metal Boat Society has some good articles. and
Roamer Owners http://www.yachtforums.com/forums/chris ... ssion-232/
I have a steel 25' so do not know much about aluminum
Adding:
Metal Boat Society has a TOPIC forum (have to register) there is a corrosion topic.
Who is online
Users browsing this forum: No registered users and 17 guests