Active Unanswered
427 oil pressure senders
Moderators: Don Ayers, Al Benton, Don Vogt
427 oil pressure senders
Does anyone know what oil pressure sender is used on the Chris Craft 427 engine? I have tried various ones but the gauge just pegs at maximum. The gauge scale is 0 - 120 psi. Thanks
1966 48' Connie
1957 22 Sea Skiff
1957 22 Sea Skiff
Re: 427 oil pressure senders
I might have some used ones. My commander had all the gauges changed out with modern ones by the previous owner. I bought matching senders for them.
The original senders worked. They just pegged the newer gauges.
Let me know if your interested. As far as I know I don't think you can get new senders. But if you can Mark Clawson of Clawson Classic Instruments would be the guy who would know.
http://www.markclawson.com/
The original senders worked. They just pegged the newer gauges.
Let me know if your interested. As far as I know I don't think you can get new senders. But if you can Mark Clawson of Clawson Classic Instruments would be the guy who would know.
http://www.markclawson.com/
Re: 427 oil pressure senders
Thanks Jim
I'd like to get them if you can spare them. If not both, then one sure would help. Let me know. My email is [email protected]
Thanks
Herb
I'd like to get them if you can spare them. If not both, then one sure would help. Let me know. My email is [email protected]
Thanks
Herb
1966 48' Connie
1957 22 Sea Skiff
1957 22 Sea Skiff
- quitchabitchin
- Posts: 568
- Joined: Tue Dec 02, 2008 9:48 pm
- Location: Oxford, OH
- Contact:
Re: 427 oil pressure senders
Are they Stewart Warner gauges? If so, you must use SW senders. I got one on eBay a couple years ago and it works fine.
FLASH1969 Chris Craft Cavalier Ski-230 HP 327Q
CCABC Board of Directors Member
CCABC Board of Directors Member
Who is online
Users browsing this forum: No registered users and 1 guest