1972 Chris Craft lancer 23

Bronze, stainless, chrome or steel. If you need information about the hardware on your classic fiberglass Chris-Craft, pose your questions here.

1972 Chris Craft lancer 23

Postby dplazesk » Fri Aug 15, 2008 3:12 am

I just purchsed a 1972 CC Lancer 23. The previous owners used the rub rail as a fender and bent it in numerous places. Does anyone know where I can purchase a replacement one. Thanks. David
dplazesk
 
Posts: 9
Joined: Mon Jul 21, 2008 1:56 am

Postby Bill Basler » Sat Aug 16, 2008 11:02 am

Can you post a close-up photo of the rubrail?
Bill Basler
User avatar
Bill Basler
 
Posts: 1996
Joined: Thu Oct 20, 2005 4:48 pm
Location: Cedar Rapids, IA

1972 lancer 23 rub rail replacemebt.

Postby dplazesk » Sat Aug 16, 2008 2:09 pm

Image
dplazesk
 
Posts: 9
Joined: Mon Jul 21, 2008 1:56 am

Postby dustoff135 » Sat Aug 16, 2008 4:52 pm

I cannot vouch for either one, but try West Marine or Defender. That's all the info that was given to me regarding the same rail. I never did the search to replace mine, decided I could live with the old for a while.

Patrick
Patrick

Previous projects: 1940 17' Barrelback, #71572
1971 XK19, ORCZ19-2016V

New project: Looking???
dustoff135
 
Posts: 184
Joined: Thu Aug 10, 2006 9:30 am
Location: Smyrna, GA

Postby Bill Basler » Sat Aug 16, 2008 10:22 pm

Try Taco Metals. You're looking for aluminum with a flexible vinyl insert. If you feel like being a bit more spendy, you can upgrade to Stainless with vinyl. The stainless is a lot harder to work with though.

The page you ant at Taco is:

http://www.tacomarine.com/cat--Aluminum ... ex_rr.html
Bill Basler
User avatar
Bill Basler
 
Posts: 1996
Joined: Thu Oct 20, 2005 4:48 pm
Location: Cedar Rapids, IA

1972 Chris Craft lancer 23

Postby dplazesk » Sun Aug 17, 2008 5:01 am

Thanks for the Taco Address Maybe one will work, David
dplazesk
 
Posts: 9
Joined: Mon Jul 21, 2008 1:56 am

Re: 1972 Chris Craft lancer 23

Postby Thomas_CCL23 » Wed Mar 11, 2009 8:01 am

I just purchsed a 1972 CC Lancer 23. The previous owners used the rub rail as a fender and bent it in numerous places. Does anyone know where I can purchase a replacement one. Thanks. David
Bayliner used a rubrail that can be used, aluminium with black rubber centre, check profile and dimensions carefully before buying! Have used it for my my 23' Lancer looks very good, dimensions are within a couple of mm to the original.
Thomas
Image
Thomas_CCL23
 
Posts: 7
Joined: Tue Jun 20, 2006 3:31 pm

Rub Rail

Postby dplazesk » Wed Mar 11, 2009 8:23 am

Where did you purchase the bayliner rub rail it looks good on the lancer. Cheers David
dplazesk
 
Posts: 9
Joined: Mon Jul 21, 2008 1:56 am


Return to “%s” Fiberglass - Hardware & Rigging

Who is online

Users browsing this forum: No registered users and 1 guest

cron