Page 1 of 1

floor mats

Posted: Sun Mar 11, 2018 12:36 pm
by jebby
what is the correct floor mat for a 1940 CC Delux. Thanks, Jebby

Re: floor mats

Posted: Sun Mar 11, 2018 7:49 pm
by Don Vogt
I believe it is the "packard" rubber, with the five or so narrow ribs close together, with intervening spaces between the sets of ribs.. dont have a picture handy but can get one if you need it.

Re: floor mats

Posted: Sun Mar 11, 2018 7:57 pm
by Don Vogt
actually, i found that i have a picture of the floor mat handy.

Re: floor mats

Posted: Sun Mar 11, 2018 8:11 pm
by Don Vogt
cant seem to attach the photo now. will work on it.

Re: floor mats

Posted: Mon Mar 12, 2018 6:04 am
by Don Vogt
here we go with the pre war floor covering.
08 tahoe pictures, etc 075.jpg

Re: floor mats

Posted: Mon Mar 12, 2018 9:17 am
by jebby
Thanks for the response Don. Do you know a supply source?

Re: floor mats

Posted: Mon Mar 12, 2018 10:19 am
by Don Vogt
not sure these days. might check restoration supply co. the boat restorers should know, like brian robinson or one of the other main restoration shops.

Re: floor mats

Posted: Tue Mar 13, 2018 7:36 am
by maritimeclassics
Don Vogt wrote:
Mon Mar 12, 2018 10:19 am
not sure these days. might check restoration supply co. the boat restorers should know, like brian robinson or one of the other main restoration shops.
That is were we get it from.
That is were we get it from

Re: floor mats

Posted: Tue Mar 13, 2018 8:39 am
by Don Vogt
Thanks, Mike. I see you are working on a '61 continental hardtop. cool boat, not many around. How about some pictures if you are to a point where the boat is taking shape again?

One of the last ones i remember being restored was Paul Harrison's, which i think was sold? "Over the top".

Re: floor mats

Posted: Wed Mar 14, 2018 8:22 am
by maritimeclassics
Thanks, we finished "Over the Top" a couple of years ago. It turned out really nice and then sold to someone in Minnesota. I haven't changed the project list in a while...I should probably do that.
Woods-Harrison-Cont.jpg

Re: floor mats

Posted: Wed Mar 14, 2018 10:05 am
by Don Vogt
Cool, mike, a beautiful job. also looks like you have a very interesting group of boats you are currently working on.