Pertronix ignition with 6V to 12V conversion

Your old Chris-Craft electrical system can be a challenge. If it runs on "juice" pose your questions and offer your advice here.

Pertronix ignition with 6V to 12V conversion

Postby bongocruiser » Fri Mar 10, 2017 3:18 pm

Hi all, I have a Model K with the IAY-4009 distributor and am using a Pertronix coil and points/condenser. I'm converting from 6V to 12V and I see they sell both a 6V and 12V product. Do I have to replace all the parts or can I still run the 6V parts on a 12V system?
User avatar
bongocruiser
 
Posts: 77
Joined: Mon Nov 14, 2005 1:08 pm
Location: Lake Winola, Pa

Re: Pertronix ignition with 6V to 12V conversion

Postby evansjw44 » Sat Mar 11, 2017 9:57 am

You need to replace the Pertronix module and the coil.
Jim Evans
User avatar
evansjw44
 
Posts: 1863
Joined: Wed Jul 05, 2006 8:46 am
Location: Grosse Pointe Farms, MI

Re: Pertronix ignition with 6V to 12V conversion

Postby bongocruiser » Sun Mar 12, 2017 4:54 pm

Thanks Jim.
User avatar
bongocruiser
 
Posts: 77
Joined: Mon Nov 14, 2005 1:08 pm
Location: Lake Winola, Pa


Return to “%s” Electrical Systems

Who is online

Users browsing this forum: No registered users and 1 guest

cron