Active Active   Unanswered Unanswered

32 volt Wiper Motor for Connie

Your old Chris-Craft electrical system can be a challenge. If it runs on "juice" pose your questions and offer your advice here.

Moderators: Don Ayers, Al Benton, Don Vogt

User avatar
Bill Basler
Posts: 1996
Joined: Thu Oct 20, 2005 4:48 pm
Location: Cedar Rapids, IA

32 volt Wiper Motor for Connie

Post by Bill Basler » Mon Apr 24, 2006 11:18 am

I am posting this inquiry, received via email from member Charles Kitch. Please respond here on Boat Buzz and I will forward the responses to him.

++++
I need a source for a 32 volt wiper motor, new or used, for my 45 ft. Connie.
I have the old motor, but can't find anyone to rebuild it. Any ideas?
Charles Kitch
++++
Bill Basler

User avatar
bobbystone
Posts: 136
Joined: Wed Oct 26, 2005 6:33 pm
Location: Chattanooga, TN
Contact:

Post by bobbystone » Tue Apr 25, 2006 5:41 pm

You might try looking around your town for someone who rebuilds electric motors. I took mine apart and replaced some parts I got from a motor I found on ebay and got it working again. It's actually a pretty simple motor.
1958 48' Constellation
Twin 454's with Paragon Transmissions
Hull No. : X-48-107

User avatar
John McConnell
Posts: 59
Joined: Wed Oct 26, 2005 6:00 pm
Location: Dallas, Texas

Post by John McConnell » Tue May 30, 2006 1:43 pm

Bill,

I just removed my starter from our '67 Connie to take in for a rebuild. The owner of the shop said he could rebuild the wiper motor. contact information is: Fritz Wilkinson, 508 Bishop Ave. Richardson, Texas 75081. Ph. 972.680.8322 or 1.866.617.7331 If interested, Charles should contact Fritz. Good luck.
John McConnell
'67, 40' Connie
Kokopelli

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests