Active Active   Unanswered Unanswered

gauges

Your old Chris-Craft electrical system can be a challenge. If it runs on "juice" pose your questions and offer your advice here.

Moderators: Don Ayers, Al Benton, Don Vogt

tgfinn
Posts: 14
Joined: Thu Oct 27, 2005 5:11 am
Location: akron/richmond/daytona
Contact:

gauges

Post by tgfinn » Tue May 30, 2006 4:23 am

i dont know to much about wireing, i would like to wire my gauges and on the back of the gauge it says ign. i suppose meaning ignition , do i run all wires to the ignition or one wire from the ign to a fuse box and then to one each gauge??? I HAVE A WIRE DIAGRAHM BUT I JUST DONT GET IT!!!.
also i know a wire has to go back to the battery to recharge it, the voltage regulator is marked battery but the schematic shows that it goes to the voltage regulator which makes sense .....im so lost i am embarrassed
tim finnerty
1960 ski boat

brianartherton
Posts: 6
Joined: Sat May 20, 2006 5:06 pm
Contact:

Post by brianartherton » Tue May 30, 2006 9:40 am

if you can send me a copy of the wire diagram I can tell you what it is saying. you can email it to:
metropolitan 1956 @ aol.com

no spaces. I put them there to prevent programs that steal peoples emails.

I will look at it and if you like send me you phone number

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests