Active Active   Unanswered Unanswered

M27 Chrysler Engine

Keeping your powerboat under power is a lot easier with good advice. Post your power systems questions here.

Moderators: Al Benton, Don Ayers, Don Vogt

Post Reply
John Cederstrom
Posts: 77
Joined: Thu May 11, 2006 8:35 pm

M27 Chrysler Engine

Post by John Cederstrom » Sun Nov 11, 2018 12:15 pm

Does anyone know if gaskets are available for this engine? I'm looking for the generator mounting gasket. It's very thin and fragile so I'd prefer not having to make it. John

User avatar
drrot
Posts: 1821
Joined: Mon Nov 14, 2005 12:28 pm
Location: McHenry, IL 60050
Contact:

Re: M27 Chrysler Engine

Post by drrot » Sun Nov 11, 2018 12:52 pm

Mike Murley is the Chrysler expert. Try him 586-725-7446
Jim Staib
www.finewoodboats.com

1931 Chris-Craft 26' #898 "Ashes"
1929 Chris-Craft 28' #3107 http://www.finewoodboats.com/1929%20Chris28.htm
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174

jfrprops
Posts: 2027
Joined: Thu Dec 29, 2005 10:41 pm
Location: Powhatan Courthouse Virginia

Re: M27 Chrysler Engine

Post by jfrprops » Mon Nov 12, 2018 9:08 am

All the guys I know are using goop instead of gaskets...claim good products out there and good results????

John in Va
1980 Fairchild Scout 30
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)

John Cederstrom
Posts: 77
Joined: Thu May 11, 2006 8:35 pm

Re: M27 Chrysler Engine

Post by John Cederstrom » Mon Nov 19, 2018 4:49 am

Thanks guys. I'll try Mike Murley. If no-go I'll go the Permatex route. Thanks again.
John C

Post Reply