Active Active   Unanswered Unanswered

Rebuild parts for a 46 CC Custom steering box

Keeping your powerboat under power is a lot easier with good advice. Post your power systems questions here.

Moderators: Don Ayers, Al Benton, Don Vogt

Idletimes
Posts: 8
Joined: Wed Dec 21, 2016 10:17 pm
Contact:

Rebuild parts for a 46 CC Custom steering box

Post by Idletimes » Tue Aug 22, 2017 12:49 pm

Where do I source parts for the steering box? Worm gear, sector shaft roller, bearings and gaskets. Thanks
Btw, welding the roller to the shaft??
Attachments
20170814_195351.jpg

tph
Posts: 89
Joined: Tue Jan 03, 2006 9:32 am
Location: Mattituck, NY
Contact:

Re: Rebuild parts for a 46 CC Custom steering box

Post by tph » Wed Aug 23, 2017 8:06 am

You can get most parts at Macs Antique auto parts and other classic car suppliers. Have seen that
welded quite a few times, not sure why.
tph

Idletimes
Posts: 8
Joined: Wed Dec 21, 2016 10:17 pm
Contact:

Re: Rebuild parts for a 46 CC Custom steering box

Post by Idletimes » Wed Aug 23, 2017 9:36 am

Thank you! I'll give them a try.

cenger
Posts: 218
Joined: Thu Jun 29, 2006 7:42 am
Contact:

Re: Rebuild parts for a 46 CC Custom steering box

Post by cenger » Thu Aug 24, 2017 1:30 pm

I got the right 2 tooth worm gear brom Barttons.

https://www.brattons.com/catalog.html?cat=479
1935 Gar Wood 16-35
1929 Gar Wood 28-30

Post Reply

Who is online

Users browsing this forum: No registered users and 25 guests