Active Active   Unanswered Unanswered

Engine Mounts '59 Ski Utility

Keeping your powerboat under power is a lot easier with good advice. Post your power systems questions here.

Moderators: Don Ayers, Al Benton, Don Vogt

Miss Kris
Posts: 20
Joined: Thu Sep 14, 2017 9:54 am
Contact:

Engine Mounts '59 Ski Utility

Post by Miss Kris » Tue Aug 07, 2018 9:46 am

I remain baffled about the correct installation of the pictured motor mount parts for our ’59 Ski Utility with 350 V8 (was a 327). Although it is apparent that not all these parts are to be installed (they were all in 'the box)', I don’t know which are correct or where they go. (front/rear). ANY guidance is certain to help. THANKS!
Attachments
MK engine Mounts 3 copy.JPG

tph
Posts: 89
Joined: Tue Jan 03, 2006 9:32 am
Location: Mattituck, NY
Contact:

Re: Engine Mounts '59 Ski Utility

Post by tph » Tue Aug 07, 2018 12:59 pm

You should be using the longer mounts and wedges in the rear, just the short wedge up front.
tph
u22 011.jpg

Miss Kris
Posts: 20
Joined: Thu Sep 14, 2017 9:54 am
Contact:

Re: Engine Mounts '59 Ski Utility

Post by Miss Kris » Fri Aug 10, 2018 12:26 pm

Thanks, tph. You've also given me a good view of part of the cooling lines hookup.

Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests