Active Unanswered
Drilling Camshaft??
Moderators: Don Ayers, Al Benton, Don Vogt
Drilling Camshaft??
I noticed a few postings regarding this modification. I know that my engine was changed by my father and have looked at the 1998 work orders. I see nothing that indicates that this was done. I am in the process of putting the engine back in after sitting flat for 15 years. I decided to look into the trani - no visible oil was seen in there?? A bit concerned - Silly question..... but to check .... is the oil suppose to drizzle in if I was to lift the front of engine or does it need to be running?
Re: Drilling Camshaft??
Pressurized oil is supposed to go in a manual gear. Blow in the end of the crank to see if it was drilled.
Jim Staib
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
www.finewoodboats.com
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174
Re: Drilling Camshaft??
That would require taking the transmission off - any other quick tests??
Who is online
Users browsing this forum: No registered users and 6 guests