Active Unanswered
Chrysler Crown M7 engine manual
Moderators: Don Ayers, Al Benton, Don Vogt
Chrysler Crown M7 engine manual
We need an engine manual for our Chrysler Crown M7 engine for our 1946 Chris Craft 22' Sportsman.
Also any info about the valve location and adjustments would be very welcome.
Many thanks. Tom Enck
Also any info about the valve location and adjustments would be very welcome.
Many thanks. Tom Enck
- Don Ayers
- Club Executive Team
- Posts: 1681
- Joined: Tue Oct 25, 2005 3:05 pm
- Location: Oklahoma
- Contact:
I have a manual on PDF. Send me an email at [email protected] and I will forward.
I got a parts list also for an m7m with exploded drawings. Might be the same as Don's but I'm not sure. Send me an email to [email protected] and I'll send this to you as well.
Tom King
http://www.ccmanuals.com
http://www.ccmanuals.com
-
- Posts: 67
- Joined: Thu Sep 17, 2020 1:36 pm
- Location: Madison, WI
- Contact:
Re: Chrysler Crown M7 engine manual
Old thread, but I'm in need of a manual for M7 as well. Anyone still have that?
'47 Sportsman/Deluxe Utility U-18-123
-
- Posts: 67
- Joined: Thu Sep 17, 2020 1:36 pm
- Location: Madison, WI
- Contact:
Re: Chrysler Crown M7 engine manual
I have an original operating manual and maintenance/parts manual. So if anything needs anything from them just ping me.
The maintenance manual is the full tear down and specs manual.
The maintenance manual is the full tear down and specs manual.
'47 Sportsman/Deluxe Utility U-18-123
-
- Posts: 67
- Joined: Thu Sep 17, 2020 1:36 pm
- Location: Madison, WI
- Contact:
Re: Chrysler Crown M7 engine manual
I was able to work with someone i know at the library (Univ of IL) and they digitized the copy they had:
https://archive.org/details/enginegasol ... 1/mode/2up
https://archive.org/details/enginegasol ... 1/mode/2up
'47 Sportsman/Deluxe Utility U-18-123
Re: Chrysler Crown M7 engine manual
Very nice !
Is there "K" version of this ?
Is there "K" version of this ?
1953 CC Rocket Runabout "Rocket Man"
Who is online
Users browsing this forum: No registered users and 5 guests