Active Active   Unanswered Unanswered

Hull decal installation

One part science, five parts experimentation. Every wood boat veteran has their secret recipe for a showy finish. Share your trials and triumphs.

Moderators: Al Benton, Don Ayers, Don Vogt

Post Reply
George Emmanuel
Posts: 151
Joined: Mon Apr 10, 2006 7:44 am
Location: Gainesville, Florida

Hull decal installation

Post by George Emmanuel » Tue Oct 10, 2017 12:07 pm

Getting closer to finishing this 17' Sportsman and have searched the site for info on installing the CC decal on the hull sides. I plan on a finish sanding, placing the decal, letting it cure and varnishing over followed by another light sanding and a second coat.

Is this recommended?

George

jim g
Posts: 922
Joined: Wed Dec 14, 2011 10:55 pm

Re: Hull decal installation

Post by jim g » Tue Oct 10, 2017 9:27 pm

You don't need to varnish over the decal.

User avatar
Bilge Rat
Posts: 178
Joined: Thu Jul 16, 2015 4:02 pm

Re: Hull decal installation

Post by Bilge Rat » Wed Oct 11, 2017 6:15 am

Varnishing or not varnishing over the decal can be done both ways. There is some protection of the decal if a couple of coats of varnish are applied over it. The postwar decals are silver and white and the decal will take on a slight golden hue once the varnish covers it. I personally like the gold hue as it looks vintage but that's just one man's opinion. I also like the deck striping a golden hue for the same reason but understand why some paint them white after varnishing.

If you will varnish over, try using a gray Scotch-Brite pad over the decal instead of sandpaper.
1966 Lyman Cruisette 25 foot "Serenity Now!"
1953 Chris Craft Sportsman 22 foot "Summerwind"

Post Reply