Looking for advise on varnishing over gold leaf. It was recommended to make sure I remove ALL of the tiny specs of gold left behind. Very nervous about varnishing over the artwork.
Thanks
Active Unanswered
Varnish over gold leaf
Moderators: Don Ayers, Al Benton, Don Vogt
-
- Posts: 246
- Joined: Tue Oct 30, 2007 2:47 pm
- Contact:
- John DeVries
- Posts: 160
- Joined: Fri Sep 22, 2006 5:47 pm
- Location: George, IA
- Contact:
Re: Varnish over gold leaf
Hello Tom,
I have done only one gold leaf job, but it turned out pretty well and the owner of the boat gave it a score of 85 out of 100. I'm working on improving that number.
There wasn't a problem with small flakes - they all seemed to disappear with a light brushing.
One thing that the owner insisted on was that I use Epifanes Rapidclear for the two protection coats. I didn't really like working with the Rapidclear, but it didn't dull the gold like normal Epifanes did.
John
I have done only one gold leaf job, but it turned out pretty well and the owner of the boat gave it a score of 85 out of 100. I'm working on improving that number.
There wasn't a problem with small flakes - they all seemed to disappear with a light brushing.
One thing that the owner insisted on was that I use Epifanes Rapidclear for the two protection coats. I didn't really like working with the Rapidclear, but it didn't dull the gold like normal Epifanes did.
John
-
- Posts: 246
- Joined: Tue Oct 30, 2007 2:47 pm
- Contact:
Re: Varnish over gold leaf
Did you roll or brush over the completed leaf?
- John DeVries
- Posts: 160
- Joined: Fri Sep 22, 2006 5:47 pm
- Location: George, IA
- Contact:
Re: Varnish over gold leaf
Tom,
I used a foam brush. The varnish was applied lightly and slowly, but I'm not sure that was necessary. I think the gold leaf was pretty well attached to the sizing.
I have since changed my varnish application method. The varnish is rolled on horizontally with a 4" foam roller, then rolled vertically, then tipped horizontally with a foam brush. The brush starts ahead of the new varnish area and ends in the previous area. Fish eyes, sags, holidays, and vertical lap lines are now all things of the past.
Sorry about the long reply times. An annoying little thing called Wordfence keeps denying access to "log in" and a temporary alternate password only works occasionally.
John
I used a foam brush. The varnish was applied lightly and slowly, but I'm not sure that was necessary. I think the gold leaf was pretty well attached to the sizing.
I have since changed my varnish application method. The varnish is rolled on horizontally with a 4" foam roller, then rolled vertically, then tipped horizontally with a foam brush. The brush starts ahead of the new varnish area and ends in the previous area. Fish eyes, sags, holidays, and vertical lap lines are now all things of the past.
Sorry about the long reply times. An annoying little thing called Wordfence keeps denying access to "log in" and a temporary alternate password only works occasionally.
John
-
- Posts: 246
- Joined: Tue Oct 30, 2007 2:47 pm
- Contact:
Re: Varnish over gold leaf
Thank you for getting back to me with your information.
I use the roll and tip method also.
Just waiting for the weather in WNY to get in to the lower 70"s to apply over my artwork.
85degrees and 85% humidity does not work for me.
I use the roll and tip method also.
Just waiting for the weather in WNY to get in to the lower 70"s to apply over my artwork.
85degrees and 85% humidity does not work for me.
Who is online
Users browsing this forum: Google [Bot] and 3 guests