I am about to put the first coat of Interlux Interprime wood sealer on my 58 Cavalier today.
Do I have to sand between coats, or is it like some vanishes where you can put another coat on within 24 hours without sanding?
The spec sheet on this is oddly silent on this requirement.
Thanks
Active Unanswered
Sanding between coats of Interlux wood sealer
Moderators: Don Ayers, Al Benton, Don Vogt
Re: Sanding between coats of Interlux wood sealer
Do two coats of sealer without sanding and then a light sand after first coat of varnish.
Re: Sanding between coats of Interlux wood sealer
Great. Thanks.
Re: Sanding between coats of Interlux wood sealer
I do a gentle rub down with "gray" Scotch Bright after the first coat of 1026 just to knock off the lumps.
Jim Evans
Re: Sanding between coats of Interlux wood sealer
Thanks Jim...... that should take care of the June Bugs too...........
Who is online
Users browsing this forum: No registered users and 18 guests