Active Active   Unanswered Unanswered

1965 46' Chris Craft Constellation Salon top side trim

Bronze, stainless, chrome or steel. If you need information about the non-wood items on your Chris-Craft, pose your questions here.

Moderators: Don Ayers, Al Benton, Don Vogt

comfortablynumb
Posts: 10
Joined: Fri Sep 16, 2011 10:59 pm
Contact:

1965 46' Chris Craft Constellation Salon top side trim

Post by comfortablynumb » Thu Sep 22, 2016 11:40 am

Okay... so I have "surfed" end-list sites for this trim.....to no avail, this is the aluminum trim that transitions 1/2" from the vinyl covered plywood top to the fiberglass..... anyone know where this can be located? :?

jfrprops
Posts: 2092
Joined: Thu Dec 29, 2005 10:41 pm
Location: Powhatan Courthouse Virginia
Contact:

Re: 1965 46' Chris Craft Constellation Salon top side trim

Post by jfrprops » Thu Sep 22, 2016 5:05 pm

photo?

John in Va.
1980 Fairchild Scout 30
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)

comfortablynumb
Posts: 10
Joined: Fri Sep 16, 2011 10:59 pm
Contact:

Re: 1965 46' Chris Craft Constellation Salon top side trim

Post by comfortablynumb » Fri Sep 23, 2016 7:51 pm

Ok... just so happens that I have 2 1963 46' Chris Crafts next to me!!....... one on either side...... both have this trim.... both are novices to the restoration world..... mine is in the process of restoration.... and have come to the Salon Top as my next summer project. I have pretty much (90%) decided to try to install new Nautolex or similar.... but to finish this off there is this "side" trim which is the aluminum pieces I mentioned earlier.... I am attaching a couple of pic's which will show location... and what it looks like installed.... they are again... from my neighbors boats
Attachments
IMG_1988.JPG
IMG_1985.JPG

User avatar
tkhersom
Posts: 983
Joined: Wed Feb 27, 2013 6:56 pm
Location: Edgecomb, Maine
Contact:

Re: 1965 46' Chris Craft Constellation Salon top side trim

Post by tkhersom » Sat Sep 24, 2016 7:33 am

I suspect you will need to find a boat being parted out, or fabricate something.

I will sound like a broken record here, but I start every search for any part I need with Jim Staib @ finewoodboats.com. :D
Troy in ANE - Former President CCABC

1957 CC 21' Continental "Yorktown" (Mom's boat)
https://www.chris-craft.org/boats/22625/
1985 Formula 242LS "Gottago"
1991 Formula 36PC "Band Aids"

Life Is Too Short To Own An Ugly Boat

User avatar
drrot
Posts: 2052
Joined: Mon Nov 14, 2005 12:28 pm
Location: Three Lakes, WI
Contact:

Re: 1965 46' Chris Craft Constellation Salon top side trim

Post by drrot » Sat Sep 24, 2016 10:20 am

tkhersom wrote:I suspect you will need to find a boat being parted out, or fabricate something.

I will sound like a broken record here, but I start every search for any part I need with Jim Staib @ finewoodboats.com. :D
Troy,
I looked. Used to be able to get it. Obsolete now.
Jim Staib
www.finewoodboats.com


1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests