Active Unanswered
Engine hatch handle hardware. 1930 model 100
Moderators: Don Ayers, Al Benton, Don Vogt
- Jim Godlewski
- Posts: 575
- Joined: Sun Feb 14, 2010 12:32 pm
- Location: Saint Clair Shores, Michigan
- Contact:
Engine hatch handle hardware. 1930 model 100
Is a machine bolt and nut original fastener type for a engine hatch handle on a 1930 model 100?
1956 17 Sportsman CC-17-2310
1930 Model 100 7152
1930 Model 100 7152
- maritimeclassics
- Posts: 700
- Joined: Sat Mar 03, 2007 4:35 pm
- Location: Traverse City, Mi
- Contact:
Re: Engine hatch handle hardware. 1930 model 100
Yes but I have not seen a square nut on them before. Most likely it was a chrome or nickel (depending on the month the boat was made) machine screw with a brass washer and a brass nut. In mid to late 1930 they switched from nickel to chrome.
Family member of Chris Craft founder
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
Owner of Maritime Classics
http://www.maritimeclassics.com
Ph# 231-486-6148
Restoration Projects:
1936 25' Gar Wood Custom
1947 Ventnor Hydroplane
1957 17' Deluxe Runabout
1948 25' Chris Craft Sportsman Twin
1959 19' Sliver Arrow Hull #75
1929 26' Chris Craft Custom Runabout
1937 25' Chris Craft Custom Runabout
- Jim Godlewski
- Posts: 575
- Joined: Sun Feb 14, 2010 12:32 pm
- Location: Saint Clair Shores, Michigan
- Contact:
Re: Engine hatch handle hardware. 1930 model 100
Thanks Mike.
1956 17 Sportsman CC-17-2310
1930 Model 100 7152
1930 Model 100 7152
Who is online
Users browsing this forum: No registered users and 3 guests