Active Active   Unanswered Unanswered

Cal Connell Crusader Cadillac V8

Keeping your powerboat under power is a lot easier with good advice. Post your power systems questions here.

Moderators: Don Ayers, Al Benton, Don Vogt

James
Posts: 119
Joined: Thu Oct 27, 2005 12:41 pm
Location: PNW
Contact:

Cal Connell Crusader Cadillac V8

Post by James » Mon Nov 13, 2006 5:41 pm

Looking for any information on these motors. I know they were 331 CID, and delivered in some mid-'50's 21' Capri's, and some 21' Cobras. Anyone have more information on specifications/numbers built/timeframe/other installations (Century's?). Also, any information on the man and the company? (Maybe sold to/became ThermoElectron?)
TIA,
James
[email protected]

User avatar
Bill Basler
Posts: 1996
Joined: Thu Oct 20, 2005 4:48 pm
Location: Cedar Rapids, IA

Post by Bill Basler » Tue Nov 14, 2006 4:02 pm

James, Here is a teaser. I have scanned the entire Cal Connell Cadillac Crusader Pre Release Operating Manual. I will post it as a downloadable PDF shortly.

Image
Bill Basler

User avatar
evansjw44
Posts: 1865
Joined: Wed Jul 05, 2006 8:46 am
Location: Grosse Pointe Farms, MI
Contact:

Crusader

Post by evansjw44 » Tue Nov 14, 2006 4:03 pm

Cadillac did furnish engines that were sold as Cadillac Crusaders. The OVH Cadillac V8 started life at 331 CID but got bigger. The same engine was made until about 1974 when it was 427 CID or there abouts. I'm thinking that they appeared around 1953 which as about when you could also buy Chrysler 331 CID hemi's. CC used the hemi in big boats as an alternative to 404 CID Herc which at best only made 200 HP and hemi was around 225.

I think by '65 Cusader had new owners and settled on Chevy block. Maybe they started with the Chey blocks earlier than that.

User avatar
evansjw44
Posts: 1865
Joined: Wed Jul 05, 2006 8:46 am
Location: Grosse Pointe Farms, MI
Contact:

Cadillacs

Post by evansjw44 » Tue Nov 14, 2006 4:09 pm

A high school friend of mine's father had a pair of Cadillac Crusaders in his 1955 Owens 35. It had a varnished hull! The man worked for Cadillac I beleive. Someone once told me he did the condersion himself in his garage (bought of borrowed the engines directly from Cadillac) but I beleive I saw the Cursader logo on them. I was told he bought the boat without engines and put them in himself.

User avatar
evansjw44
Posts: 1865
Joined: Wed Jul 05, 2006 8:46 am
Location: Grosse Pointe Farms, MI
Contact:

More Cadillac

Post by evansjw44 » Tue Nov 14, 2006 4:22 pm

This is just for Bill, mostly. I have a Boats Magazine Boat Show issue January 1954. It has a summary of available engines. This does not list Cadillac or Crusader. There is an ad for the Barr Mfg. conversion harware for the 331 CID Cadillac. Its got a picture of one, even. Its a great chart. If I can scan it I'll send it along.

User avatar
Bill Basler
Posts: 1996
Joined: Thu Oct 20, 2005 4:48 pm
Location: Cedar Rapids, IA

Post by Bill Basler » Tue Nov 14, 2006 4:30 pm

Here is a Cal Connel Cadillac Operators Manual:

images/Cal_Connell_Cadillac_Crusader_En ... Manual.pdf
Bill Basler

Wood Commander
Posts: 885
Joined: Wed Oct 26, 2005 11:48 pm
Location: Seattle area
Contact:

Post by Wood Commander » Tue Nov 14, 2006 4:35 pm

One of our ACBS Pacific NorthWest Chapter members has a Cal Connel (spelling ?) Cadillac engine for sale. I think that you can send me a message off forum and I can probably give you his name and phone number. He is a very knowledgeable guy, one of many in our group.
Bret

1953 35' Commander "Adonis III"

1970 23' lancer project

User avatar
tom king
Posts: 402
Joined: Thu Oct 27, 2005 8:44 am
Location: San Antonio, Texas
Contact:

Post by tom king » Wed Nov 15, 2006 8:33 am

It's interesting for members to note that the manual Bill just posted also contains a section on the adjustment of the Paragon Tranny.

Tom

User avatar
drrot
Posts: 2052
Joined: Mon Nov 14, 2005 12:28 pm
Location: Three Lakes, WI
Contact:

Post by drrot » Wed Nov 15, 2006 9:09 am

James,
THe 331 OHV Caddy came out in cars in 1949. It evolved to 365 then to 390. 1962 390" looked just like an earlier 331". Similar to small block Chevys. I had a 16 Barrelback that was raced in the 1960s with a 390. It was decked out to look like a 331 which was what most other boats ran. Mine was just a bit faster!
The 390 was also made in 1963 but that one does not interchange.

User avatar
Paul P
Posts: 622
Joined: Mon Oct 30, 2006 1:48 pm
Location: Nashville, Tennessee, Cumberland River and Lake system
Contact:

Cadillac power (some photos)

Post by Paul P » Thu Nov 16, 2006 7:17 am

Hi guys,

I've always thought the "power" in power boating was (almost) as much an issue as the boat itself, especially with the older and more valuable boats.

Here are a couple photos to peak some interest in the vintage Cadillac power! I took these pics at the 2005 Mt. Dora (FL) boat show, and if you have not been there yet, it's a great way to start off the season in late March. Mt. Dora is a charming walk-friendly little town with lots of nice restaurants too.

Image

Image

Image


Regards, Paul
1956 17' CC Sportsman, 300-hp
1957 17' CC Sportsman, 95-hp
1966 20' CC fiberglass Sea Skiff, 210-hp+
1973 23' CC Lancer inboard project, 427/375-hp.
1966 38' CC Commander Express, 427/300-hp(2)

So many boats.........so little time.....but what a way to go!!

James
Posts: 119
Joined: Thu Oct 27, 2005 12:41 pm
Location: PNW
Contact:

Thanks....

Post by James » Sat Nov 18, 2006 12:10 am

you guys!
Lots of good information here.
Now to get one!

James

User avatar
drrot
Posts: 2052
Joined: Mon Nov 14, 2005 12:28 pm
Location: Three Lakes, WI
Contact:

Post by drrot » Sat Nov 18, 2006 8:41 am

James,
While looking for some Kermath info i found this old Cal Connell flyer. Says Converted by Detroit Racing Equiptment.
Distributed by Cal Connell Cadillac Co.
I'm is dated 1954.
The first shot is the front page and a price sheet
The second shot is the back cover and back of price sheet
The last shot is the flyer opened.


Image
Image
Image

Wood Commander
Posts: 885
Joined: Wed Oct 26, 2005 11:48 pm
Location: Seattle area
Contact:

Post by Wood Commander » Sun Nov 19, 2006 1:26 pm

James,did you see my post above? I know a guy that has one for sale. I don't know the particulars but I can put you in touch with him.
Bret

1953 35' Commander "Adonis III"

1970 23' lancer project

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests