Active Active   Unanswered Unanswered

Paragon 32a rotation

Keeping your powerboat under power is a lot easier with good advice. Post your power systems questions here.

Moderators: Don Ayers, Al Benton, Don Vogt

Tacoma Cavalier
Posts: 3
Joined: Mon Oct 17, 2016 1:31 pm
Contact:

Paragon 32a rotation

Post by Tacoma Cavalier » Thu Jan 12, 2017 2:19 pm

I have a question regarding my starboard Paragon P 32a transmission in 68 CC cavalier. I have not been able to find the an exact answer in the post, so here it goes.....The Cavalier was re-powered with Chevy 350's several years before I purchased it this summer, the starboard engine number 8 cylinder rings and piston gave way and badly scored the cylinder walls. I have a freshly rebuilt 350 marine engine I can use but it is a left hand rotation engine. I have read that the Paragon"s rotation can be reversed by reversing the pump and changing the reverse bands location. I have not been able to find any technical information on this procedure. So my question's are this, can I use the Left hand rotation engine for the starboard (right) engine by changing the rotation of the Paragon P 32a trans? If so does anyone know of any info/manual that covers this procedure? and last does anyone know of a shop or mechanic in the Puget Sound area of Washington state that might be able to do this ?
I got a deal on the boat, a 33 foot 68 Cavalier, in good shape other than the starboard engine and got a better deal on the rebuilt 350, so I am keen on using it, Plus no more counter rotation concerns (at least with the engine).
Thank you in advance and thanks to "keepers" of this post. This Cavalier if my first foray in to the wooden boat world and I have learned much cruising the posts.
Mike in Tacoma

User avatar
drrot
Posts: 2052
Joined: Mon Nov 14, 2005 12:28 pm
Location: Three Lakes, WI
Contact:

Re: Paragon 32a rotation

Post by drrot » Thu Jan 12, 2017 5:13 pm

Is the engine in the boat flywheel forward or flywheel aft? If both props spin the same way it's gonna steer funky.
Jim Staib
www.finewoodboats.com


1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174

Tacoma Cavalier
Posts: 3
Joined: Mon Oct 17, 2016 1:31 pm
Contact:

Re: Paragon 32a rotation

Post by Tacoma Cavalier » Thu Jan 12, 2017 5:17 pm

Flywheel aft.
thanks

jim g
Posts: 1003
Joined: Wed Dec 14, 2011 10:55 pm
Contact:

Re: Paragon 32a rotation

Post by jim g » Thu Jan 12, 2017 8:24 pm

Your setting up the pump to match the rotation of the engine. Your doing it so it will pump fluid through the trans to operate. Its not going to make a left hand engine into a right hand engine. There are transmissions available today that will do that.

Now if you want to use the left hand engine in place of the right hand engine. You will have to change the rotation of the pump to match the engine and you will have to put a left hand prop on the boat.

At that point you will no longer have counter rotating engines. So steering in marinas and docking is going to become a lot harder as you will no longer be able to steer the boat with throttles.

My recommendation would be to just change the cam and timing gears in the left hand engine to make it right hand. You also might have to change the front and rear oil seals.

User avatar
drrot
Posts: 2052
Joined: Mon Nov 14, 2005 12:28 pm
Location: Three Lakes, WI
Contact:

Re: Paragon 32a rotation

Post by drrot » Thu Jan 12, 2017 9:07 pm

Starboard engine in flywheel aft should be opposite rotation.
Jim Staib
www.finewoodboats.com


1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174

jfrprops
Posts: 2092
Joined: Thu Dec 29, 2005 10:41 pm
Location: Powhatan Courthouse Virginia
Contact:

Re: Paragon 32a rotation

Post by jfrprops » Fri Jan 13, 2017 9:33 am

above post are right on. Comment: I am surprised that boat had those trans? Would have expected HF7's?????
Did a lot of work on my 1966 33' Cav.....glad to share any info.

John in Va.
1980 Fairchild Scout 30
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)

Tacoma Cavalier
Posts: 3
Joined: Mon Oct 17, 2016 1:31 pm
Contact:

Re: Paragon 32a rotation

Post by Tacoma Cavalier » Mon Jan 16, 2017 11:55 pm

Thanks for the information, I will end up getting the starboard 350 rebuilt and selling the left hand rotation rebuilt engine, doesn't matter how good of deal it was if I can't use it. Slowly getting to know this boat with the help of this site and all the other wooden chris fanatics in the Tacoma area. The goal is to have her seaworthy by spring and finish her, we'll to be honest, never. There will always be something.

bflaherty
Posts: 62
Joined: Tue Feb 19, 2013 3:21 pm
Location: Bellingham, WA
Contact:

Re: Paragon 32a rotation

Post by bflaherty » Sat Feb 11, 2017 3:05 am

May I suggest a consultation with a professional? Everyone needs good advice now and then. My father has been working on boats for 35+ years in the Seattle area, he has also been a go-to mechanic for the ACBS-PNW group since joining in 1982. Give him a call and he can offer advice, services, and likely have reccomendations on best shops for marine engine rebuilds (I know from experience that automotive shops can easily wreck marine engines). His personal business is Yacht Specialists (206)7-three-0-nine-8-five-3
Brian Flaherty
1969 Chris-Craft Cavalier 17 Ski Boat "TUPPERWARE"

"You'll never discover great lands, with your feet planted in the sand"

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests