Active Active   Unanswered Unanswered

Engine Mounts '59 Ski Utility

Keeping your powerboat under power is a lot easier with good advice. Post your power systems questions here.

Moderators: Al Benton, Don Ayers, Don Vogt

Post Reply
Miss Kris
Posts: 19
Joined: Thu Sep 14, 2017 9:54 am

Engine Mounts '59 Ski Utility

Post by Miss Kris » Tue Aug 07, 2018 9:46 am

I remain baffled about the correct installation of the pictured motor mount parts for our ’59 Ski Utility with 350 V8 (was a 327). Although it is apparent that not all these parts are to be installed (they were all in 'the box)', I don’t know which are correct or where they go. (front/rear). ANY guidance is certain to help. THANKS!
You do not have the required permissions to view the files attached to this post.

tph
Posts: 85
Joined: Tue Jan 03, 2006 9:32 am
Location: Mattituck, NY
Contact:

Re: Engine Mounts '59 Ski Utility

Post by tph » Tue Aug 07, 2018 12:59 pm

You should be using the longer mounts and wedges in the rear, just the short wedge up front.
tph
u22 011.jpg
You do not have the required permissions to view the files attached to this post.

Miss Kris
Posts: 19
Joined: Thu Sep 14, 2017 9:54 am

Re: Engine Mounts '59 Ski Utility

Post by Miss Kris » Fri Aug 10, 2018 12:26 pm

Thanks, tph. You've also given me a good view of part of the cooling lines hookup.

Post Reply