Active Active   Unanswered Unanswered

KL Tuneup Specs

Keeping your powerboat under power is a lot easier with good advice. Post your power systems questions here.

Moderators: Al Benton, Don Ayers, Don Vogt

Post Reply
trebot
Posts: 25
Joined: Sun Mar 04, 2007 10:05 pm
Contact:

KL Tuneup Specs

Post by trebot » Wed Oct 17, 2018 4:55 pm

Having my KL rebuilt. What is timing setting? What spark plugs should I use and gap?

User avatar
drrot
Posts: 1820
Joined: Mon Nov 14, 2005 12:28 pm
Location: McHenry, IL 60050
Contact:

Re: KL Tuneup Specs

Post by drrot » Thu Oct 18, 2018 8:28 am

Depending on the year. If you have a timing pointer, it is dot to point. If not, it is "Take the boat out and run it under load (getting up on plane) advance it till it pings then retard it till she starts easy" Direct from manual. Champion J8J or J8C .028"
Jim Staib
www.finewoodboats.com

1931 Chris-Craft 26' #898 "Ashes"
1929 Chris-Craft 28' #3107 http://www.finewoodboats.com/1929%20Chris28.htm
1947 Penn Yan 12' Cartopper WXH474611
1950 Chris-Craft 22' Sportsman U-22-1532
1957 Chris-Craft 26' Sea Skiff SK-26-515
1968 Century 17' Resorter FG-68-174

User avatar
mbigpops
Posts: 339
Joined: Tue Feb 16, 2010 9:18 am
Location: Eastern Massachusetts

Re: KL Tuneup Specs

Post by mbigpops » Thu Oct 18, 2018 11:17 am

Sounds so simple. Right ?

Well it is until you decide that knocking at 2500 RPMs under load is not acceptable and you want more and start messing around with prop sizes, distributors and carburetors.

Let us know how you make out. I am still fighting performance issues but I can tell you that these engines are great runners. Just need to figure out the exact formula.

Mark
1953 CC Rocket Runabout "Rocket Man"

Post Reply