Help! Original Parts Needed

Bronze, stainless, chrome or steel. If you need information about the non-wood items on your Chris-Craft, pose your questions here.

Help! Original Parts Needed

Postby maritimeclassics » Fri Feb 24, 2012 10:11 am

Well after 3 1/2 years of work I am finally down to the last stretch on the 2 1929 28' Chris Craft triples. We are going to have them in the show at Tahoe this summer if all goes well and we can locate the parts needed to finish the project. He is where all of you come in. I need help finding parts that are original to these boats and fall in the years of 1929-1931 give or take a few years depending on the part. Here is what I need: 1 clum switch, 2 large auto-bailers and 2 small auto-bailers, 4 cigar Lighters, and 1 throttle horn assembly. Thanks for your help.
Image

Image
Family member of Chris Craft founder
www.maritimeclassics.com
Ph# 503-490-7031

Personal Ride:
1948 Chris Craft 22' Sedan
Hull# S-22-096

Restoration Projects:
1929 28' Chris Craft Custom (Oregon)
1929 28' Chris Craft Limo (Oregon)
1941 18.5 Century Triple Barrel Stern
1950 16' Chris Craft Riviera
User avatar
maritimeclassics
 
Posts: 368
Joined: Sat Mar 03, 2007 4:35 pm
Location: Traverse City, Mi

Postby JimF » Sat Feb 25, 2012 10:39 am

I have one of the bailers you can have. The shorter pipe is 10" and the long 14". The pipe diameter is 1"ID. I cannot get the file to post the picture but I can send you the photos by email. fleetwoodboats@aol.com
User avatar
JimF
Club Executive Team
 
Posts: 358
Joined: Mon Nov 14, 2005 10:48 am
Location: Austin, TX

Postby maritimeclassics » Sat Feb 25, 2012 7:13 pm

Thanks so much Jim, now only 1 small and 2 large to go.
Family member of Chris Craft founder
www.maritimeclassics.com
Ph# 503-490-7031

Personal Ride:
1948 Chris Craft 22' Sedan
Hull# S-22-096

Restoration Projects:
1929 28' Chris Craft Custom (Oregon)
1929 28' Chris Craft Limo (Oregon)
1941 18.5 Century Triple Barrel Stern
1950 16' Chris Craft Riviera
User avatar
maritimeclassics
 
Posts: 368
Joined: Sat Mar 03, 2007 4:35 pm
Location: Traverse City, Mi


Return to Hardware & Rigging

Who is online

Users browsing this forum: No registered users and 0 guests