Active Unanswered
Need help with final touch on Capri Interior
Moderators: Don Ayers, Al Benton, Don Vogt
- Pete DeVito
- Posts: 483
- Joined: Fri Jun 02, 2006 6:48 pm
- Location: Florida
Need help with final touch on Capri Interior
Well I am down to the final touch on the Capri interior and need some help.
I have the following questions if anyone out there has original seats on their 57/58 Capri. The interior I have is the Tango Red and White Tolex.
Questions
(top photo)
Front seat and rear seat backs both have stitching in the middle lower front side. The following items I need verification.
• Spacing of stitching distance between horizontal stitched lines
• Stitch count (stictches per inch) in that horizontal stitched line
• Number of rows of stitching
(bottom photo)
• Lower front seat back is it red or white? This is the area where the seat bottom touches the seat back front side.
• What areas does the Silver Mylar welting go?
• Seat bottom side bands what color Red or White?
Thanks for any help
I have the following questions if anyone out there has original seats on their 57/58 Capri. The interior I have is the Tango Red and White Tolex.
Questions
(top photo)
Front seat and rear seat backs both have stitching in the middle lower front side. The following items I need verification.
• Spacing of stitching distance between horizontal stitched lines
• Stitch count (stictches per inch) in that horizontal stitched line
• Number of rows of stitching
(bottom photo)
• Lower front seat back is it red or white? This is the area where the seat bottom touches the seat back front side.
• What areas does the Silver Mylar welting go?
• Seat bottom side bands what color Red or White?
Thanks for any help
Past Project 1948 17' Deluxe
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
- Pete DeVito
- Posts: 483
- Joined: Fri Jun 02, 2006 6:48 pm
- Location: Florida
Re: Need help with final touch on Capri Interior
Well I have verbal confirmation that there were 6 rows of stitching in the middles of the seats and from photos it looks like the seat bands were White.
This has helped with two of the questions.
Can anyone help fill in the balance of the blanks for me. It seems that there are two boats we know of out there with original interior but can't get them to respond.
This has helped with two of the questions.
Can anyone help fill in the balance of the blanks for me. It seems that there are two boats we know of out there with original interior but can't get them to respond.
Past Project 1948 17' Deluxe
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
-
- Posts: 130
- Joined: Tue Jun 19, 2007 2:37 am
- Location: Sacramento, CA.
- Contact:
Re: Need help with final touch on Capri Interior
I have upholstered a couple and have some detailed copys of what looks to be original. I did this boat with wood worker in north ca. I have every reason to belive it is correct .
So the answer to is the bottom red or white , RED is correct as cushions are most red and will blend in when cushion is in place.
So the answer to is the bottom red or white , RED is correct as cushions are most red and will blend in when cushion is in place.
Stanley Marshall CUSTOM UPHOLSTER ,
Over 100 boats , @[email protected]
Over 100 boats , @[email protected]
- Pete DeVito
- Posts: 483
- Joined: Fri Jun 02, 2006 6:48 pm
- Location: Florida
Re: Need help with final touch on Capri Interior
This is a big help..
Would you happen to have the details on the stitching in the middle of the set backs along with where the silver welting goes?
Thanks again for all your help
Pete
Would you happen to have the details on the stitching in the middle of the set backs along with where the silver welting goes?
Thanks again for all your help
Pete
Past Project 1948 17' Deluxe
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
-
- Posts: 130
- Joined: Tue Jun 19, 2007 2:37 am
- Location: Sacramento, CA.
- Contact:
Re: Need help with final touch on Capri Interior
Pete, not sure what the question is , the welting should go around the inserts and the perimeter of back . If this helps great , if not what you need try me again or call anytime 916-708-6241 Stan
Stanley Marshall CUSTOM UPHOLSTER ,
Over 100 boats , @[email protected]
Over 100 boats , @[email protected]
- Pete DeVito
- Posts: 483
- Joined: Fri Jun 02, 2006 6:48 pm
- Location: Florida
Re: Need help with final touch on Capri Interior
Stan,
I want to thank you for all your help. Yes my question was that I was wondering what areas the silver welting went on the seats. I had my old skins for the pattern but the welting was incorrect. I had the museum photos but hard to tell.
Thanks again!
Pete
I want to thank you for all your help. Yes my question was that I was wondering what areas the silver welting went on the seats. I had my old skins for the pattern but the welting was incorrect. I had the museum photos but hard to tell.
Thanks again!
Pete
Past Project 1948 17' Deluxe
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
- Pete DeVito
- Posts: 483
- Joined: Fri Jun 02, 2006 6:48 pm
- Location: Florida
Re: Need help with final touch on Capri Interior
Any good ideas on how to stretch the material for the crash pad in the cruved corners. I did this on my 48 but am struggling on my Capri to get them all even with no pleats.
Past Project 1948 17' Deluxe
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
- quitchabitchin
- Posts: 568
- Joined: Tue Dec 02, 2008 9:48 pm
- Location: Oxford, OH
- Contact:
Re: Need help with final touch on Capri Interior
You have to make relief cuts on the backside and pull it tight as you go. Corners can be tricky and it takes a little practice.
FLASH1969 Chris Craft Cavalier Ski-230 HP 327Q
CCABC Board of Directors Member
CCABC Board of Directors Member
-
- Posts: 130
- Joined: Tue Jun 19, 2007 2:37 am
- Location: Sacramento, CA.
- Contact:
Re: Need help with final touch on Capri Interior
I HAVE VIDEO OF HOW TO INSTALL CRASH PADS . IF YOU NEED PLEASE GIVE ME A YELL.
Stanley Marshall CUSTOM UPHOLSTER ,
Over 100 boats , @[email protected]
Over 100 boats , @[email protected]
- Pete DeVito
- Posts: 483
- Joined: Fri Jun 02, 2006 6:48 pm
- Location: Florida
Re: Need help with final touch on Capri Interior
Stanley that sure would help. I am really struggling with the corners
is it on Youtube? or can it be copied to my dropbox?
thanks
is it on Youtube? or can it be copied to my dropbox?
thanks
Past Project 1948 17' Deluxe
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
-
- Posts: 130
- Joined: Tue Jun 19, 2007 2:37 am
- Location: Sacramento, CA.
- Contact:
Re: Need help with final touch on Capri Interior
I have videos, They cost 50.00 and show all steps to make and install crash pad.
I WILL BE DOING A SEMINAR THIS MONTH AT Currtis's shop in GRASS VALLEY on UPHOLSTERY .along with wood restorers.
I WILL TRY TO GUIDE YOU THROUGH IT . 1ST. how wide is your vinyl ? I cut mine at 5" wide to give plent of finger room to work with, I never make relief cuts as you may have to do adjustments .
START IN MIDDLE OF BOW , work towards corners. as you get 10" away from stop. Go to corners pull the vinyl up and towards the center of boat. the warmer the vinyl the easier it is to pull . when at half way through corner start pulling towards the aft. this pulls the wrinkles out of corners,
How is your crash pad made? I sew welt to the vinyl before I install . If yours is two parts, start with welting use 1/4" staples.. use a small cut of pad foam to space welt from top edge , used as depth guide. once welt is installed start adding tack strip using 3/8" stainless steel staples. Use 1/4" stainless steel staples to secure to deck. less damage to deck wood.
I WILL BE DOING A SEMINAR THIS MONTH AT Currtis's shop in GRASS VALLEY on UPHOLSTERY .along with wood restorers.
I WILL TRY TO GUIDE YOU THROUGH IT . 1ST. how wide is your vinyl ? I cut mine at 5" wide to give plent of finger room to work with, I never make relief cuts as you may have to do adjustments .
START IN MIDDLE OF BOW , work towards corners. as you get 10" away from stop. Go to corners pull the vinyl up and towards the center of boat. the warmer the vinyl the easier it is to pull . when at half way through corner start pulling towards the aft. this pulls the wrinkles out of corners,
How is your crash pad made? I sew welt to the vinyl before I install . If yours is two parts, start with welting use 1/4" staples.. use a small cut of pad foam to space welt from top edge , used as depth guide. once welt is installed start adding tack strip using 3/8" stainless steel staples. Use 1/4" stainless steel staples to secure to deck. less damage to deck wood.
Stanley Marshall CUSTOM UPHOLSTER ,
Over 100 boats , @[email protected]
Over 100 boats , @[email protected]
-
- Posts: 130
- Joined: Tue Jun 19, 2007 2:37 am
- Location: Sacramento, CA.
- Contact:
Re: Need help with final touch on Capri Interior
Oh , some problems arise when the vinyl is cut in the wrong direction from the roll.
The vinyl has more stretch across the roll than up the roll. CUT THE CRASH PAD UP THE ROLL OR RAILROADED. All the vinyl for crash pad is cut in the same direction up the roll. this allows for more stretch to get around the corners. You may have trouble if too cold. use hair dryer to warm vinyl on back side. , We use steam in some cases. but, hot water on a rag let sit till soft then pull and staple.
Hope this helps. good luck.
The vinyl has more stretch across the roll than up the roll. CUT THE CRASH PAD UP THE ROLL OR RAILROADED. All the vinyl for crash pad is cut in the same direction up the roll. this allows for more stretch to get around the corners. You may have trouble if too cold. use hair dryer to warm vinyl on back side. , We use steam in some cases. but, hot water on a rag let sit till soft then pull and staple.
Hope this helps. good luck.
Stanley Marshall CUSTOM UPHOLSTER ,
Over 100 boats , @[email protected]
Over 100 boats , @[email protected]
- Pete DeVito
- Posts: 483
- Joined: Fri Jun 02, 2006 6:48 pm
- Location: Florida
Re: Need help with final touch on Capri Interior
my pad material and welting is all made in one. I have done exactly what you described so far. I think I need to get the material a little warmer and stretch through the corners. I am awaiting on a second set of hands also. thanks again for the advise.
Past Project 1948 17' Deluxe
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
Re: Need help with final touch on Capri Interior
Would love to see some pix of your progress.
Troy in ANE - Former President CCABC
1957 CC 21' Continental "Yorktown" (Mom's boat)
https://www.chris-craft.org/boats/22625/
1985 Formula 242LS "Gottago"
1991 Formula 36PC "Band Aids"
Life Is Too Short To Own An Ugly Boat
1957 CC 21' Continental "Yorktown" (Mom's boat)
https://www.chris-craft.org/boats/22625/
1985 Formula 242LS "Gottago"
1991 Formula 36PC "Band Aids"
Life Is Too Short To Own An Ugly Boat
- Pete DeVito
- Posts: 483
- Joined: Fri Jun 02, 2006 6:48 pm
- Location: Florida
Re: Need help with final touch on Capri Interior
Latest update on Knotty Blonde
Upholstery is going in and looking great! Tested all systems today and all looked good except for a little knocking at shaft coupling when fully engaged in gear.
A couple of photos of the crash pad being installed..
Upholstery is going in and looking great! Tested all systems today and all looked good except for a little knocking at shaft coupling when fully engaged in gear.
A couple of photos of the crash pad being installed..
Past Project 1948 17' Deluxe
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
Past Project 1957 19' Capri
Future Project 1955 17' Special Sportsman
Who is online
Users browsing this forum: No registered users and 0 guests