Active Active   Unanswered Unanswered

Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Framing, planking and fairing. Repair, or reconstruction. If it's hull related, you'll find it here.

Moderators: Al Benton, Don Ayers, Don Vogt

User avatar
robertpaul
Posts: 306
Joined: Mon May 13, 2013 2:35 pm

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by robertpaul » Mon Aug 06, 2018 9:29 am

To catch up on the last post before I had to down tools, I attach the following pictures. I pulled this plank because I was suspicious it was a tiny bit proud of the chine for some sinister reason. Turns out that was not the case. It probably just worked a bit over the decades and several fasteners near the bow failed. None the less I am glad that I took the time to remove it as I can now be assured that the chine and the plank are in excellent condition. I did find one interesting thing that surprised me a little as you will see in the pics.
You do not have the required permissions to view the files attached to this post.
1937 35' Double Stateroom Enclosed Cruiser

User avatar
robertpaul
Posts: 306
Joined: Mon May 13, 2013 2:35 pm

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by robertpaul » Tue Aug 14, 2018 6:32 pm

All the new bottom planks are attached with plenty of time for the adhesive to cure before the move. Now I will temporarily secure the side planks that I repaired for the trip and stuff the boat with everything at hand. I don't have time to install them permanently before the date of our eviction from the Port of Toronto. It has been pretty hot.
1937 35' Double Stateroom Enclosed Cruiser

User avatar
robertpaul
Posts: 306
Joined: Mon May 13, 2013 2:35 pm

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by robertpaul » Mon Aug 27, 2018 4:05 pm

Due to the short notice for our eviction, I concentrated on finishing the bottom... which I did. The side planks are secured for the trip, but are also just about ready for the final install themselves. The transom planks need to be repaired or replaced, but that will be pretty straightforward. Then it will be re-canvassing the deck and roof, stripping, fairing and painting the hull, filling the fastener countersinks in the bottom and fairing/sanding that and paint. Then I will do the brightwork and reassemble the galley and cabin areas. No sweat. I have to do the front windows as well but the frames are done and ready to be put together around the glass. Launch in 2020 for sure.
You do not have the required permissions to view the files attached to this post.
1937 35' Double Stateroom Enclosed Cruiser

Captain Nemo
Posts: 603
Joined: Tue Jul 07, 2009 7:40 pm
Location: Lyons, NY

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by Captain Nemo » Mon Aug 27, 2018 6:02 pm

Hope she has a smooth trip, good luck. :)
Boats are to be made of wood, otherwise, God would have grown fiberglass trees.

jfrprops
Posts: 2015
Joined: Thu Dec 29, 2005 10:41 pm
Location: Powhatan Courthouse Virginia

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by jfrprops » Mon Aug 27, 2018 6:48 pm

keep us informed on this great project!

John in Va.
1980 Fairchild Scout 30
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)

User avatar
robertpaul
Posts: 306
Joined: Mon May 13, 2013 2:35 pm

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by robertpaul » Sat Sep 08, 2018 7:42 am

Elude made the trip to Merrickville safely and easily thanks to Balsdon Trucking. Murray Balsdon handles the boats and driving. Karen Balsdon is the person in charge. I took a few pictures of Elude's new digs before she was placed inside and then my camera battery ran out of juice. Aylings Marina actively encourages folks to work on their own boats. The room in the picture dates to 1846 as a mill. It was first used as a boat storage and workshop in 1963. The adjoining part of the building is the actual workshop where they manufacture, among other things, real wood doors. Some of the woodworking machines are pretty old and awesome. I feel like I've ended up in Santa's workshop! I will move all my tools from Toronto (band saw, planer, table saw, etc,) and set them up right beside Elude. So.... all is well that ends well. Check out my roommate's Matthews!
You do not have the required permissions to view the files attached to this post.
Last edited by robertpaul on Sat Sep 08, 2018 7:25 pm, edited 1 time in total.
1937 35' Double Stateroom Enclosed Cruiser

joanroy
Posts: 654
Joined: Sun Jan 29, 2012 1:46 pm

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by joanroy » Sat Sep 08, 2018 11:27 am

What a great spot. Your very lucky to find a yard that accommodates wooden cruisers and do it yourselfers. Elude looks beautiful in the light of day. Carry On!

Captain Nemo
Posts: 603
Joined: Tue Jul 07, 2009 7:40 pm
Location: Lyons, NY

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by Captain Nemo » Sat Sep 08, 2018 11:55 am

Glad to see she made the trip without incident. Looks like a good work area. I too, am fortunate to be in an old school, wood boat friendly yard too. They are getting harder and harder to find. Looking forward to more of your great work! :D
Boats are to be made of wood, otherwise, God would have grown fiberglass trees.

jfrprops
Posts: 2015
Joined: Thu Dec 29, 2005 10:41 pm
Location: Powhatan Courthouse Virginia

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by jfrprops » Sun Sep 09, 2018 9:39 am

Great digs....get on it....perfect work space.

John in Va
1980 Fairchild Scout 30
19?? custom Argentine Runabout 16'
1954 Whirlwind deluxe dual ckpt 16'
1921 Old Town Charles River 17' (founding Captain, James River Batteau Festival)

User avatar
robertpaul
Posts: 306
Joined: Mon May 13, 2013 2:35 pm

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by robertpaul » Sun Sep 09, 2018 10:46 am

Thanks guys. It really is a neat place. Like stepping back in time. The town itself is astoundingly beautiful itself. Walking 200 metres from the workshop means crossing the swing bridge over the locks and being at the main intersection. Most of the buildings are limestone and there is a nice park right beside the locks. I am chomping at the bit to get back to work.
1937 35' Double Stateroom Enclosed Cruiser

User avatar
robertpaul
Posts: 306
Joined: Mon May 13, 2013 2:35 pm

Re: Honey, have you finished fixing Elude yet? 1937 35' Cruiser

Post by robertpaul » Wed Sep 12, 2018 9:04 pm

New home. Ready to start the final big push to completion and chill after the pressure of the last 8 weeks.
You do not have the required permissions to view the files attached to this post.
1937 35' Double Stateroom Enclosed Cruiser

Post Reply