Boat Buzz

I have a Chris Craft that was passed down to me from my father after his passing. I am wanting to restore it. The Hull Number is V16 942. STARB D 12 or Single 15.
Engine Number is 203814, Model K, Firing Order 153624 best I can tell from the motor.

I've got one question right now, where is the best place to send this motor to have it rebuilt and what would the cost estimate be to do so?

And, any idea what year my boat is?

thanks everyone,
Dale

Hi, Welcome to the boat buzz.
My best guess, looking at The Essential Guide, your boat is a cavalier.
Hull no. is more likely V15 942- V is for the Cavalier division and 15 is the boat length. I say that it must be 15' long because the 16's were outboards. 942 is the production sequence #. These were built between 1955-1959, with 1096 hulls produced. 942 may have been built in 1958 maybe?
The numbers on the bottom of the ID plate tell what propeller it has. In your case it is a 12x15, meaning 12" diameter with a 15" pitch.
I could dig deeper into my archives and find the engine number production date which might narrow your year to a year or two but I think your boat is probably a !958.
Post pictures if you can we would all like to see your new project.

I am digging into removing the rotten wood and my next step, I think is to get the motor rebuilt....my questions are:

1. Where is the best place to have the motor rebuilt? It is a Model K,
2. What is a best guess on how much this would cost?

thanks
Dale