Page 1 of 1

Pre war Chris Craft welting/Piping configuration?

Posted: Thu Sep 10, 2020 6:33 am
by joe.rosenfeld
I am interested to know where the welting was on pre war, 1939 17’ deluxe utility cushions. All 4 sides top? top and bottom? just the sides? I have gleaned some information from previous Boat Buzz posts . Squinting at the pictures in the Essential guide and photos from the Mariners Museum hasn’t quite got there, some of the photos almost look like drop fronts with welding on the sides , others look like just the top? Any information is appreciated
Thanks Joe

Re: Pre war Chris Craft welting/Piping configuration?

Posted: Fri Sep 11, 2020 4:59 am
by Matt Smith
Hi Joe, since no expert has replied, I will try. Sorry. The question is kinda confusing. The welting on the cushions? Or the seat backs? Cushions are all the same with welting all around. The seats, SOME, had welting dividing the sea backs. The photos attached are a 1939 17 Utility. UNTOUCHED. ORIGINAL ORIGINAL ORIGINAL!!!!! Bask in its history

Re: Pre war Chris Craft welting/Piping configuration?

Posted: Fri Sep 11, 2020 12:09 pm
by joe.rosenfeld
Thanks Matt, Exactly what I was looking for , right down to the same year, model, and upholstery color. Amazing.
. Are there straps on the bottom of the seat cushions.
Thanks again
Joe

Re: Pre war Chris Craft welting/Piping configuration?

Posted: Fri Sep 11, 2020 1:20 pm
by Matt Smith
Its Andy Chuddys barn find. Dont have shots of straps. Here is the original story I did https://www.woodyboater.com/blog/2018/0 ... w-winners/

Re: Pre war Chris Craft welting/Piping configuration?

Posted: Mon Sep 14, 2020 9:54 am
by Don Vogt
The first entry in this category has some good inforMation from don Ayers.

Yes there is welting all the way around on at least the front cushions, both on the top and around the bottom. 2 straps per cushion too underneath running from back to front. (Remember they were considered life preservers although kapok sinks when wet.)The center cushion is square, but the outer sides of the two end cushions are tapered in to reflect the narrowing of the hull from stern to bow. The inside of the cushion is kapok inside a cotton bag as shown in the picture. There is sewing to keep the kapok from lumping up. A wad of kapok was placed in each inside corner of the outer russaloid cover to help keep the shape of the cushion, I suppose. Let me know if you need more details or pictures.