Page 1 of 1

Engine Mounts '59 Ski Utility

Posted: Tue Aug 07, 2018 9:46 am
by Miss Kris
I remain baffled about the correct installation of the pictured motor mount parts for our ’59 Ski Utility with 350 V8 (was a 327). Although it is apparent that not all these parts are to be installed (they were all in 'the box)', I don’t know which are correct or where they go. (front/rear). ANY guidance is certain to help. THANKS!

Re: Engine Mounts '59 Ski Utility

Posted: Tue Aug 07, 2018 12:59 pm
by tph
You should be using the longer mounts and wedges in the rear, just the short wedge up front.
tph
u22 011.jpg

Re: Engine Mounts '59 Ski Utility

Posted: Fri Aug 10, 2018 12:26 pm
by Miss Kris
Thanks, tph. You've also given me a good view of part of the cooling lines hookup.