Active Active   Unanswered Unanswered

Finishing sequence for new wood

One part science, five parts experimentation. Every wood boat veteran has their secret recipe for a showy finish. Share your trials and triumphs.

Moderators: Al Benton, Don Ayers, Don Vogt

Post Reply
Peter McBratney
Posts: 27
Joined: Wed Jun 13, 2007 3:04 am

Finishing sequence for new wood

Post by Peter McBratney » Sat Feb 10, 2018 6:00 am

I am rebuilding my 19ft 1961 Capri with all new wood on bottom, topsides and deck. The new wood is faired and sanded to 180 grit. Deck stripes slots are all cut but not yet filled
I am looking for guidance on the best sequence and materials where appropriate for the new wood on sides and deck for bleaching, neutralizing, staining and varnishing.

Happy to correspond via email if that suits or call via Skype or phone

Peter McBratney, Adelaide, South Australia

User avatar
maritimeclassics
Posts: 549
Joined: Sat Mar 03, 2007 4:35 pm
Location: Traverse City, Mi
Contact:

Re: Finishing sequence for new wood

Post by maritimeclassics » Mon Feb 12, 2018 9:24 am

I think we could help with that. I have a sheet that we used for a couple of the workshops we put out. We are putting on another workshop on this very topic on the 17th of March. I will post it here and then you can give me a call if you would like when you can and we could talk it over. There is a few different ways that people do it but this works very well for us and a proven method.
Varnishing.doc
Maritime Classics 231-486-6148
You do not have the required permissions to view the files attached to this post.
Family member of Chris Craft founder
http://www.maritimeclassics.com
Ph# 231-486-6148

Restoration Projects:
1956 14' Chris Craft Kit Boat
1961 21' Continental Hardtop
1941 19' Chris Craft Custom BB
1941 23' Chris Craft Custom BB
1950 20' Chris Craft Riviera

Post Reply