Active Active   Unanswered Unanswered

Hand / Hatch Rail Hardware

Bronze, stainless, chrome or steel. If you need information about the non-wood items on your Chris-Craft, pose your questions here.

Moderators: Don Ayers, Al Benton, Don Vogt

Post Reply
User avatar
ewdahler
Posts: 18
Joined: Sat Mar 24, 2007 1:48 am
Location: Wickford, RI
Contact:
Contact ewdahler

Hand / Hatch Rail Hardware

Post by ewdahler » Sun Oct 07, 2007 10:56 pm

I'm missing an end piece of the hand rail hardware, for 3/4" rail for a '59 Sea skiff 30' as recently exchanged on this site as shown in attached photo. If anyone has a spare or can suggest a source I would greatly appreciate it.
Image
Eric Dahler
1959 30' Sea Skiff
Top
User avatar
evansjw44
Posts: 1865
Joined: Wed Jul 05, 2006 8:46 am
Location: Grosse Pointe Farms, MI
Contact:
Contact evansjw44

Hand Rail Ends

Post by evansjw44 » Mon Oct 08, 2007 10:24 am

The fittings in the picture look more like mid section than ends. I had a '58 30 Skiff many years ago but I can't remember the rail end fittings.

Here in MI I go to Chuck Grewe [email protected] or Marine Sales and Repair, Earl Stilson. Both have large collections of old hardware.
Top
User avatar
Al Benton
Club Executive Team
Posts: 3549
Joined: Thu Oct 27, 2005 3:41 pm
Location: St. Louis, MO

Post by Al Benton » Mon Oct 08, 2007 12:31 pm

Actually, there was one end and one mid fitting in this photo. These were mailed to a Club member a few days ago. I'm hoping the other end fitting shows up so I can pass it on to Eric. Another box of hardware is on its way to me now so if it's there I'll PM you, Eric.

Al
Top
Post Reply

Return to “Hardware & Rigging”

Who is online

Users browsing this forum: No registered users and 4 guests